Low water pressure is a predominant problem in hotels, homes and other areas throughout the civilized world. This is of course frustrating, given that most jobs in the house can’t be undertaken without water. Fortunately, fixing low water pressure problems is a downhill task. You only need to know the main causes of low water pressure, some of which are listed below: Old pipes always cause leakage. They are up there together with rust, as far as low pressure issues are concerned. To fix the problem, examine your pipes then contact Plumbers in Paradise Valley to help you replace them with new ones.
The size of your pipes can affect the pressure and water flow. The ideal pipe size for desirable pressure is anything between ½ inch and 1.27 centimeters. Pipes that are wider than this prescribed size hardly sustain high pressure levels, so consider replacing any pipe in your home than is wider than ½ inch in size. It is the prime gating mechanism responsible for controlling water flow throughout the house. It is placed at a strategic spot where the main water channel connects with the homes supply line. That means that improper setting of the pressure regulator or a mechanical fault can lead to significant decline in water pressure.
Your water meter is connected to a master shut off valve which can completely stop your water supply. If the valve screw gets slightly turned, you will notice some amount of pressure reduction. To fix the problem, check your valve and make sure that it is fully open. This will ensure that you get water at a normal pressure. It so happens that sometimes the pressure problem is localized and limited to a faucet. This means that the problem is at the aerator, which is supposed to prevent water splashing. If you need quality Plumbers in Paradise Valley call us today.