Detecting Water Leaks at its best in Phoenix, AZ

The damage done by water leaks in Phoenix, AZ often lead to thousands of dollars of repairs. Although a water leak seems simple, the damage done is not.

There are different ways to detect water leaks in your apartment, house, or condo. A simple 30 minutes is all it takes to see if your household has any leaks. To do this, you will have to shut off all water for 30 minutes in the household. Start by turning off all faucets and water using appliances. This includes washing machines, dish washers, etc. You also cannot use water at all during the 30 minutes or you will not be able to tell if you have a leak or not.

After shutting off the water, you will need to write down the measure of the sweep hand location on your water meter. Take the next 20-30 minutes to relax. After the time is up write down the sweep hand location of your water meter again. When detecting water leaks take the first measure of the meter and compare it to the second measure of the meter.

If the meter shows that you used water between the first and second measure, you most likely have a leak. Now to determine where the leak is coming from. The easiest way to do this is to call a plumbing or other profession to do a home inspection and have them fix the leak. 4 Fathers Home Services can help you with this!

If your meter measure did not change, then you do not have a leak and should not be worried! If you still suspect a leak in your house, you can contact a professional service to do a farther inspection. Remember to check for leaks about once a year. Do not let water damage from leaks put you behind financially, detect those water leaks in Phoenix, AZ!