Have you ever been faced with a plumbing emergency in your home and you don’t know how to prevent further damage? This is a common occurrence to most home owners. Your plumbing system may develop some problems which you need to counteract fast with preventive measures to avoid having a bigger problem to fix after some time. Here are some problems and measures you should take when faced with a plumbing emergency: Scalding or steaming hot water indicates that your water heater is overheated. In such a situation, you should turn off the gas or electricity connected to the water heater. Open all the hot water faucets including your shower until all the water flowing is cold. This will relieve and cool down the water heater. Do not turn off the cold water that is supplied to the water heater as this will cause more overheating. Once done, your emergency Plumbing in Queen Creek, AZ should be able to inspect your water’s thermostat and pressure reliever valve.
Kitchen disposals often jam when large wastes go through it. However, most of them come with a reset button. In case of a jammed disposal, press the reset button. If it does not run, try to remove the item causing a jam using a pair of tongs. Remove the item and try to run the disposal again. Never use your hand to remove stuck objects. Remember this is electric-powered equipment. In case this does not solve the problem, contact an emergency plumber to inspect and repair the unit.
If you’ve leaking faucet or a leaking pipe, you should wait until a professional plumber fixes the problem. This is because, you may end up having flooding problem or your utility bill rising due to the leakages. Therefore, you should try to minimize the leakage by collecting the water in buckets or collecting jars if it’s not leaking a lot. However, if a lot of water is coming out, you should locate the main valve and shut it off as you wait for the Plumbing in Queen Creek, AZ.